Agilent Technologies N9344C User Manual

5Key Reference
98 N9342C/43C/44C User’s Guide
The analyzer provides two sweep time rules to
meet the different sweep time requirements:
Gate View
Key access: [Sweep] > {Gated Sweep}
Toggles the Sweep type between Sweep and FFT
mode. The default setting is sweep mode.
View SweepTime
Key access: [Sweep] > {Gated Sweep}
Toggles the Sweep type between Sweep and FFT
mode. The default setting is sweep mode.
Gate Delay
Key access: [Sweep] > {Gated Sweep}
Toggles the Sweep type between Sweep and FFT
mode. The default setting is sweep mode.
Gate Length
Key access: [Sweep] > {Gated Sweep}
Toggles the Sweep type between Sweep and FFT
mode. The default setting is sweep mode.
Gate Source
Key access: [Sweep] > {Gated Sweep}
Toggles the Sweep type between Sweep and FFT
mode. The default setting is sweep mode.

Agilent Technologies N9344C Specifications

General

Brand	Agilent Technologies
Model	N9344C
Category	Measuring Instruments
Language	English