Getting Started 2
N9342C/43C/44C User’s Guide 11
Power Requirements
The AC power supplied must meet the following
requirements
:
The AC/DC power supply charger adapter supplied
with the analyzer is equipped with a three- wire
power cord, in accordance with international safety
standards. This power cord grounds the analyzer
cabinet when it is connected to an appropriate
power line outlet. The power cord appropriate to
the original shipping location is included with the
analyzer.
Various AC power cables are available from Agilent
that are unique to specific geographic areas. You
can order additional AC power cords that are
appropriate for use in different areas. The AC
Power Cord table provides a lists of the available
AC power cords, the plug configurations, and
identifies the geographic area in which each cable
is typically used.
The detachable power cord is the product
disconnecting device. It disconnects the main AC
circuits from the DC supply. The front- panel
switch is only a standby switch and does not
disconnect the instrument from the AC LINE
power.
Voltage: 100 to 240 VAC
Frequency: 50/60 Hz
Power: Maximum 80 W
To Next Page
Loading...
Need help?
General
