Key Reference 5
N9342C/43C/44C User’s Guide 107
Turns off the active function markers.
Marker To
Accesses the following marker function menu keys:
•To Center
Key access: [MARKER] > {To Center}
Sets the center frequency of the analyzer to the
marker frequency. In Delta mode, pressing [Marker]
> {Marker To} > {To Center} sets the center frequency
to the marker delta value. The function is not
available in zero span.
•To Start
Key access: [MARKER] > {Marker To}
Changes the start frequency so that it is equal to
the frequency of the active marker. In Delta mode,
To S t ar t sets the start frequency to the marker delta
value. To St ar t is not available in zero span.
• To Stop
Key access: [MARKER] > {Marker To}
Changes the start frequency so that it is equal to
the frequency of the active marker. In Delta mode,
To S t op sets the stop frequency to the marker delta
value. To St op is not available in zero span.
•To Reference
Key access: [MARKER] > {Marker To}
Changes the reference level to the active marker
value, moving the marked point to the reference
level (top line of the graticule). In Delta mode,
pressing [Marker] > {Marker To} > {To Reference} sets
the reference level to the amplitude difference
between the markers.
Function
Key access: [MARKER] > {Function}
Accesses the following menu keys that allows you
to change the active marker readout mode.
To Next Page
Loading...
Need help?
General
