Functions and Measurements 3
N9342C/43C/44C User’s Guide 81
Saving a file
Refer to the following three steps to save a file:
1 Press [File] > {Directory} > {Media Type} to select the
file directory.
2 Press [File] > {Save as}, The pop- up window
displays for your further setting.
3 Edit a file name.
A file name can consist of letters and digits. A
single key stroke on the numerical keypad inputs
a digital number; and consecutive key stroke
selects and inputs a letter.
4 Rotate the knob to choose the file type you need.
5 Press [Enter] to save the file.
When a file saving completes, the saved file will
display in the file list..
Quick Saving a File
Press [Save] to quickly save a trace or a screen to
either the local memory or an external USB device,
depending upon the setup of the save path.
Refer to the steps for saving a trace/screen:
1 Press [File] > {Setup} > {Qsave Type} to set the quick
save file type.
2 Press [File] > {Directory} > {Media Type} to select the
file directory.
3 Press [Return], [Save] to save a trace or a screen
copy to the pre- defined memory. The trace or
screen will be automatically assigned with a
default file name. A trace will be assigned with a
file name, such as HYTRACE, HYTRACE_1, and
consecutive decimal numbers appended to the
alphabetic file name, such as HYSCREEN,
HYSCREEN_1 and consecutive decimal numbers
appended to the alphabetic file name.
NOTE
When a file is selected, you can edit the file name by pressing
the numeric and alphabetic hardkeys on the right side of the
analyzer’s front panel.
To Next Page
Loading...
Need help?
General
