5 Error Messages
144 N9342C/43C/44C User’s Guide
Overview
If an improper operation occurs during the
instrument configuration, a message will appear on
the status line indicating the incident and the how
the spectrum analyzer corrected the setting
automatically. press [System] > {System Info} > {Error
History} to read the specific descriptions of those
messages.
Example
In this example, a failure explanation is generally
included with each error to further define its
meaning. The instrument messages in this guide
are listed numerically.
NOTE
A symbol [F] at the beginning of an error message indicates
this is an error caused by manual front panel operation. A
symbol [R] at the beginning of an error message indicates this
is an error caused by remote control mode.
07.01 15:48 [F] -330 No matched module
<Code>
This message indicates no matched
measurement or mode found.
<Explanation in manual>
<Message>
<Time>
To Next Page
Loading...
Need help?
General
