1Introduction
Technical Specifications
Seahorse XFe Analyzer Operating Manual 11
Technical Specifications
Model number 101991-100, S7800A (XFe96)
102238-100, S7801A (XFe24)
S7800B (XFe96)
S7801B (XFe24)
Part number 101991-100 (XFe96)
102238-100 (XFe24)
Dimensions
Controller:
Analyzer:
Width × height × depth
19" × 17" × 12"
48 cm × 43 cm × 30 cm
16" × 24" × 17"
41 cm × 61 cm × 43 cm
Weight Analyzer: 45 lbs/20 kg
Controller: 22 lbs/9 kg
Power requirements 100-240 V AC 50/60Hz
Analyzer: 6 A
Controller: 3.2 A
Power cord rating 3- wire (grounded) AC power cord rated 10 A or greater
Power fuse ratings 250 V/10 A Time delay fuses
Environmental conditions "Normal" Environmental conditions- indoor use, altitude to 2,000 m
Room temperature range +40 °F - 86 °F (+4 °C - 30 °C)
No direct sunlight
Humidity less than 80%
Sample temperature and
environment
Controlled to user-selected temperature between 16 °C and 42 °C,
but at least 12 °C above ambient temp
No gas or humidity control
Software OS Windows 7, 32 bit Windows 10, 64 bit
Data interface RS232c (internal)
TCP/IP (external)
USB Type B
64 bit barcode reader
To Next Page
Loading...
