22
To pair a non-Cardo Bluetooth
®
intercom group unit:
1. Confirm your unit is in Standby Bluetooth
®
intercom mode (LED flashes blue slowly).
If your unit is not in Bluetooth
®
intercom mode, tap
and .
x1
For more information, see Switching between Intercom modes.
2. To initiate 2-way pairing:
• On your unit, press for 5".
5”
→ The LED flashes red.
• Tap
x1
to activate the Cardo getaway.
→ The LED flashs red and blue.
Bluetooth
®
intercom pairing needs to be initiated on the other device.
• The unit confirms that pairing has succeeded.
Rider 1 You
To Next Page
Loading...
