EasyManuals Logo

Aiphone AX-248C User Manual

Aiphone AX-248C
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
- 38 -
8-2
8-3
Privacy (PRIV)function
1. To make the master into privacy mode (prevent monitoring
from other stations), press the privacy button (LED lights up).
2. To cancel privacy mode, press the privacy button again (LED
goes out).
The privacy setting cannot be changed while in communication.
PRIV LEDPrivacy setting
Lit
Off
Setting up
Not set
Communicating
with master station
Microphone mute
If you hold down the TALK
button for at least one second,
communication switches to
press-to-talk.
Microphone enabled
The microphone is muted while
you hold down the PRIV button.
Communicating
with door station
Microphone enabled
The microphone is
muted while you hold
down the PRIV button.
Microphone enabled
The microphone is
muted while you hold
down the PRIV button.
Calling a master station from a master station and communicating
1. Press individual selector button of master station.
2. The pre-tone (Pi-Po-n) sounds both master stations, and starts
hands-free communication. The Talk LED lights when you talk
and goes off as you listen to the caller.
3. Press the OFF button to end the communication. You can end
the call either master station. The call also ends automatically
when the set talk end time is reached.
If the called master station has privacy mode set (the privacy
settings button is lit up), communication is only one-way,
from the calling master station to the called master station,
and nothing can be heard from the called master side. Press
the TALK button on the called master station for at least one
second. Press-to-talk communication starts. Hold down the
TALK button to talk and release to listen to the caller.
NOTES: 1. You can connect a foot switch and use it the same
way as the TALK button.
2. You can adjust the receive volume with the volume
control at bottom of the master station.
3. You cannot call a master station while it is
communicating. You will hear the busy signal (Pi-Pi-
Pi).
Calling tone TALK button
LED display
Pi-Po-n
Po-o-n
-
Lit
Lit (called)
Flashing (calling)
Flashing Error in device or
wiring. Contact
the system manager.
Call and talk
All call
Equipment error
1
2
3

Other manuals for Aiphone AX-248C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Aiphone AX-248C and is the answer not in the manual?

Aiphone AX-248C Specifications

General IconGeneral
BrandAiphone
ModelAX-248C
CategorySecurity System
LanguageEnglish

Related product manuals