Aiphone IX-MV - Page 168

System settings (Settings (Table View))
168
6.2.4. Ringtone Settings (Option Input) (Master Station only)
Select the ringtone for an incoming contact input call.
Set a different ringtone for each source.
How to configure the ringtone
1) Identify the Master Station to be configured using "Master Station list."
2) Identify the station to be registered in "Call source."
3) Click the cells that correspond to 1) and 2). As the pull-down menu appears, choose a
ringtone.
Call Patterns 1 through 6, Tremolo sound, Busy tone, On-hold tone, Operation sound, Error
sound, and Sound registered in "3.4. Custom Sound Registry" ➤ P.146
4) When done, click .
5) Click .
Point
"Call Pattern 2" is the default setting.
6.2.5. Master Station Group List (Master Station only)
Click , the screen will proceed to "3.3. Group."
Register a group referring to "3.3. Group" ➤ P.142.
1)
2)
Master Station list Call source
3)