Aiphone IX-MV - Page 169

System settings (Settings (Table View))
169
6.2.6. Door Station Group List (Door Station only)
Configure the group to be called when a contact input is triggered on the Door Stations.
Click , the following window will be shown.
 How to create a Called Station Group
 Shared Called Group Settings
A group registered in the shared group settings will be applied to all Master Stations.
1) Verify that the "Shared Group" table is shown.
If "Shared Group" is not visible, scroll the screen all the way to the left.
2) Identify the called group to be configured in "Group Registry List."
3) Identify the station to be registered in the group in "Master Station list."
Master Station list
Group Registry List
Nine groups can be set
up for each station.
Setting Station Name
Configure a group from the stations
shown.
3)
1)
4)
2)