General Information:
Click on Installation
Click on General
The Installation window will display.
This screen will display all of the general
installation information for the particular
job / installation you are logged into.
Keypad codes:
Click on Installation
Click on Keypad codes
The Keypad code list window will display.
This is a list of all of the keypad codes
that are programmed for this specific
job / installation.
Comments:
Click on Installation
Click on Comments
This will direct you to your Word program. This is used to make notes / comments for the installation. The Word document will be
defaulted to save as the name of the installation.
Pg. 23
To Next Page
Loading...
