Installation
Install the TL-2000 installation program from the provided CD.
Open the TL-2000 program.
Once open choose one of the three available user types.
Supervisor – Allows for full access of all aspects of the program, including the ability to change the parameters of the size
of the system. Typically used for managing multiple installations.
Installation Company – Allows for access to all aspects of the program, not including changing parameters of the system.
Recommend to be used by installer.
Managing Agent – To be used by end user to add, remove, or change tenant names.
Adjust the time and date by clicking on the Modification button.
After choosing user and adjusting time and date, click OK to enter program.
Click on Modification to change time and date.
There are 3 types of users to choose from.
Supervisor: Full access
(default password = super)
Installation Company: General access
(default password = install)
Managing Agent: Restricted access
Can change resident’s
information, but not
parameters of system.
(default password = manage)
General Screen:
To begin a new installation, click on the Installation button in the general screen menu.
Pg. 6
To Next Page
Loading...
Need help?
General
