EB AT-RP-4GU EN 1-3
Safety instructions and measures
Risk of actuator damage due to excessively high or low tigh-
tening torques.
Observe the specied torques on tightening actuator compo-
nents (bolts and nuts). Excessive tightening torques lead to
parts wearing out quicker. Parts that are not tightened enough
may loosen.
Î Refer to section 15.2 ‘Tightening torques‘.
Risk of actuator damage due to the use of unsuitable lubri-
cants.
The lubricants to be used depend on the actuator material and
operating temperatures. Unsuitable lubricants may corrode
and damage the components.
Î Use only lubricants approved by AIR TORQUE . Refer to
section 15.3 ‘Lubricants‘.
To Next Page
Loading...
