Airoptic GasEye - Ethernet Cable Installation Instruction (Atex Version)

Electrical installation
GasEye Cross Duct
Operating i
nstructions,
0
5
/202
1
79
3. If the ethernet cable is not used either permanently or temporarily, make sure
the gland cap is twisted on, so the ethernet socket and whole central unit
housing is sealed.
Figure 87. Ethernet gland closing.
Ethernet cable installation instruction (ATEX version):
1. Overview of ethernet cable for ATEX version of analyzer:
Figure 88. Ethernet cable (ATEX version).
2. Put the cable through the gland and connect plug into ethernet socket.