airwave 1 - Change the transport belt; Step 1: Switch off the machine and disconnect power; Step 2: Remove upper cover

OPERATING INSTRUCTIONS
20
Change the transport belt
You can easily change the transport belt at AirWave2 yourself.
Step 1: Switch off the machine and disconnect power
Always switch off the machine before opening it.
Disconnect power to the machine by removing
the power cord completely from the machine.
Allow the machine to cool down!
You must follow this step. It is for your safety.
Step 2: Remove upper cover
Undo both screws of upper cover with appropriate
hex key and remove cover
Step 3: Loosen transport rolls
Turn the tension lever to move the transport rolls
apart.