airwave 1 - Air cushion types - WRAPPER

OPERATING INSTRUCTIONS
4
Air cushion types – WRAPPER
Our standard version – Polyethylene 20µm (0.8 mil)
8.1-8.6 with 450 m (1480 ft.); 8.3/8.4 XL (23,6in) with 300 m (980 ft.)
Type 8.0 AirWave wrapper 420mm (16.5 in) large chamber
1 large chambers for large volumes and for use as a top layer
Type 8.1 AirWave wrapper 420mm (16.5 in) 2 large chambers
2 large chambers for large volumes and for use as a top layer
Type 8.2 AirWave wrapper 420mm (16.5 in) 2 small chambers
2 chambers for moulded components, edge protection, and
wrapping
Type 8.3 AirWave wrapper 420mm (16.5 in) 4 chambers
4 chambers for use as an intermediate layer, wrapping, and
envelope
Type 8.4 AirWave wrapper 420mm (16.5 in) 8 chambers
8 chambers for use as an envelope and intermediate layer
Type 8.5 AirWave wrapper 420mm (16.5 in) 7 wavy chambers
7 chambers for use as an envelope and intermediate layer
Type 8.6 AirWave wrapper 420mm (16.5 in) cloud type chambers
4 chambers for use as an envelope and intermediate layer
Type 8.9 AirWave wrapper 420mm (16.5 in) 3 chambers
3 chambers for use as an envelope and intermediate layer
All type 8.x are also available as Jumbo rolls with more running meters per roll,
and also in 15µm (0.6 mil) or 12µm (0.5 mil), in pink antistatic version, in our „Heavy Duty“ version
made of laminated material, or as 100% biodegradable material. Get in touch with us.