airwave 1 - Air cushion types - FILLER

OPERATING INSTRUCTIONS
3
Air cushion types – FILLER
Our standard version – Polyethylene 20 µm (0.8 mil)
7.1-7.3 with 700 m (23000 ft.); 7.4-7.5 with 600 m (1970 ft.)
Type 7.1 AirWave air cushion filler 100 x 210 mm (3.9 x 8.3 in)
Ideal for filling small voids and for use as an intermediate layer
Type 7.2 AirWave air cushion filler 150 x 210 mm (5.9 x 8.3 in)
Ideal for filling medium-sized voids and for use as an air cushion
ring
Type 7.3 AirWave air cushion filler 200 x 210 mm (7.9 x 8.3 in)
Ideal for filling large voids
Type 7.4 AirWave air cushion filler 130 x 280 mm (5.1 x 11.0 in)
Ideal for filling large voids
Type 7.5 AirWave air cushion filler 240 x 280 mm (9.4 x 11.0 in)
Ideal for filling large voids
All type 7.x are also available as Jumbo rolls with more running meters per roll,
and also in 15µm (0.6 mil) or 12µm (0.5 mil), in pink antistatic version, in our „Heavy Duty“ version
made of laminated material, or as 100% biodegradable material.
Get in touch with us.