Wi-Fi — allows you to enable and disable Wi-Fi on the hub. After
pressing the [i] button, the network settings are opened:
DHCP / Static — selection of the type of the hub IP address to
receive: dynamic or static
IP Address — hub IP Address
Subnet mask — subnet mask in which the hub operates
Router — gateway used by the hub
DNS — DNS of the hub
Forget this network — after pressing, the hub deletes the network
settings and no longer connects to it
GSM — enabling/disabling cellular communication, conguring
connections, and checking account.
SIM card settings
Connection settings
Cellular Data — disables and enables SIM cards on the hub
Roaming — if it is activated, the SIM cards installed in the hub can work
in roaming
Ignore network registration error — when this setting is activated, the
hub ignores errors when trying to connect via a SIM card. Activate this
option if the SIM card cannot connect to the network
Disable Ping Before Connecting — when this setting is activated, the
hub ignores operator communication errors. Activate this option if the
SIM card cannot connect to the network
SIM card 1 — displays the number of the SIM card installed. Click on
the eld to go to the SIM card settings
SIM card 2 — displays the number of the SIM card installed. Click on
the eld to go to the SIM card settings
To Next Page
Loading...
Need help?
General
