Prior to installing the hub, make sure that you have selected the optimal
location: the SIM card demonstrates consistent reception, all the devices have
been tested for radio communication, and the hub is hidden from direct view.
The device developed only for indoor use.
The hub should be reliably attached to the surface (vertical or horizontal). We do
not recommend using double-sided adhesive tape: it cannot guarantee secure
attachment and simplies the removal of the device.
Do not place the hub:
Hub installation
Do not ip the hub when attaching vertically (for instance, on a wall). When
properly xed, the Ajax logo can be read horizontally.
outside the premises (outdoors);
nearby or inside any metal objects that cause attenuation and shielding of
the radio signal;
in places with a weak GSM signal;
close to radio interference sources: less than 1 meter from the router and
power cables;
in premises with temperature and humidity over the permissible limits.
1. Fix the hub lid on the surface using bundled screws. When using any other
xing accessories, make sure that they do not damage or deform the hub
lid.
2. Put the hub on the lid and x it with bundled screws.
To Next Page
Loading...
Need help?
General
