Akai 42” - Names and Functions of Parts; Front View; Side View

10
4. Names and Functions of Parts
4.1 Front View
4.2 Side View
Diagram
The functions of the buttons are described as follows:
STANDBY: Press
(Standby) button to turn off to
standby and turn on from standby.
VOL.+/-
A. They are used as ＜ / ＞ buttons to navigate in
the OSD Menu screen.
B. Press to adjust the volume.
CH.+/-
A. They are used as ∧ / ∨ buttons to navigate in
the OSD Menu screen.
B. Press to scan through channels. To scan quickly
through channels, press and hold down either
channel button.
MENU: Press to display the menu. Press again to exit
the menu.
SOURCE: Press to cycle display DTV, TV, AV,
S-Video,
YPbPr1, YPbPr2, VGA, HDMI1 and HDMI2 source
menu. It has the function of Enter in the menu.
 (IR) Infrared Receiver: Receuves IR signals from the remote control.
Power indicator:
Indicator ON (Red) Standby mode
Indicator ON (Green) Power ON mode
Diagram