4
ATTENTION
Instructions for moving the product:
Ensure that the power connector and any other leads are
unplugged before moving the product.
Avoid using dropped or damaged appliances:
If the product is dropped and the housing is damaged, the
internal components may function abnormally. Unplug the
connector immediately and contact the manufacturer for repair.
Continuous use of the product may cause fire or electric shock.
Do not touch the power cord during lightning:
To avoid electric shock, avoid handling the power cord during
thunder storms.
Never use a damaged power cord:
Heavy objects, heat or tensile force may damage the power
cord and cause fire or electric shock.
Do not change or open the back cover:
Removing the back cover of the product may cause fire or
electric shock.
Contact the manufacturer when inspection or
adjustment is required.
Do not use the product if any abnormality occurs:
If any smoke or odor becomes apparent, unplug the connector
and contact the manufacturer immediately. Do not try to repair
the product by yourself.
Do not install the product close to smoke or moisture:
Fire or electric shock may be caused when the product is
installed close to smoke or moisture.
Do not install the product in an area with heavy dust or
high humidity:
Fire or electric shock may be caused when the product is
installed in a place with heavy dust or high humidity.
The power cable should be kept away from heat sources:
The heat produced by any heat source may melt the covering
of the power cable.
WARNING
To Next Page
Loading...
