Akai AP-Q310 - Page 37

No.
8
MODEL
Ap-Q310/C
RETURN PLUNGER POSITION ADJUSTMENT
MAIN GEAR
REJECT
GAP A
PLUNGER
S$L90l ——>_
{
ADJUSTMENT
SCREW 7
Press the reject lever down with a finger until the reject plate touches
the
main
gear
pin.
Operate
the
plunger
(SL901)
in
this
position
and
adjust the installation screw at exactly the point where the gap A between
the reject lever and plunger disappears. (Refer to Fig. 8)
After adjustment, confirm that the Auto Play is operating.