Akai AP-Q310 - Page 47

No 6 MODEL AP-Q41/c
LEAD-IN POSITION ADJUSTMENT (Refer to Fig. 5)
Place a record on the Platter.
Auto-play the record and confirm where the Stylus descends.
Depress the START/CUT button to return the Tone Arm to the Tone Arm
Rest.
Turn the Lead-in Adjustment Screw with a screwdriver:
©) Clockwise : To make the Stylus descend towards the Spindle.
(D) Counterclockwise : To make the Stylus descend away from the
Spindle.
NOTE: Do not turn the screw too far.
Carry out the adjustment little at a time and confirm the position
after each adjustment.