121
USING MPC AS AN RTAS PLUGIN
You can now use MPC software as an RTAS plugin in Pro Tools 9 and Pro Tools 10. When used
as an RTAS plugin, MPC software offers the same features and functionality as the standalone
software version. Please refer to your Pro Tools documentation for instructions on loading RTAS
plugins.
ROUTING TRACKS TO SEPARATE OUTPUTS IN TRACK MIXER
MODE
You can now route your tracks to Submixes or outputs (e.g., Out
1,2) in Track Mixer Mode.
To do this, click the Track Mixer tab in the software's upper
section. On each track, click the pop-up menu above the Pan
knob, and select the desired Submix or output.
 When working with the MPC Renaissance, the Out 1,2 are
routed to the STEREO OUT jacks. Out 3,4 are routed to the
ASSIGNABLE MIX OUT jacks.
EXPORTING SUBMIXES AND OUTPUTS
You can now export your Submixes or your mixes routed
the outputs (e.g., Out 1,2). This can be useful if you want to
export separate parts of a project—for instance, an
instrumental track and the a cappella vocal track.
To select a Submix or output to export, click the File menu
and select Audio Mixdown. In the Audio Mixdown window,
under Render option, click the pop-up menu to select the
desired Submix or output. By default, this will be set to Out
1,2 (which is also the default setting for all track routings).
To Next Page
Loading...
Need help?
General
