Akai MPC - Page 97

97
Chorus 2-voice
Parameter Value Range Default Value Q-Link No.
Wet/Dry 0 (DRY) - 100 (WET) 100 (WET) Q9
Delay 0 - 100 20 Q10
Amount 0 - 100 80 Q11
Width 0 - 100 80 Q12
Feedback 0 - 100 50 Q5
Rate 0 - 100 10 Q6
Autopan
This effect uses an LFO to move the incoming signal back and forth across the stereo field,
creating a somewhat rotary effect.
Parameter Value Range Default Value Q-Link No.
Wet/Dry 0 (DRY) - 100 (WET) 100 (WET) Q10
Rate 0 - 100 10 Q11
Autopan Sync
Parameter Value Range Default Value Q-Link No.
Wet/Dry 0 (DRY) - 100 (WET) 100 (WET) Q10
Rate 8 bars - 1/32 1/4 Q11
Tremolo
This effect uses an LFO to increase and decrease the volume of the signal. Depending on the
LFO shape, this can produce a smooth wave effect (sine wave) or a stuttering "ON / OFF" effect
(square wave).
Parameter Value Range Default Value Q-Link No.
Wet/Dry 0 (DRY) - 100 (WET) 100 (WET) Q9
Rate 0 - 100 10 Q10
Sine to Square 0 (Sine) – 100 (Square) 0 Q11
Tremolo Sync
Parameter Value Range Default Value Q-Link No.
Wet/Dry 0 (DRY) - 100 (WET) 100 (WET) Q9
Rate 1 bar - 1/16tr 1/4 Q10
Sine to Square 0 (Sine) – 100 (Square) 0 Q11