Akai MPC Reference Manual

99
HP Filter Sweep
Parameter Value Range Default Value Q-Link No.
Wet/Dry 0 (DRY) - 100 (WET) 80 Q9
Low Frequency 0 - 100 50 Q10
High Frequency 0 - 100 100 Q11
Resonance 0 - 100 33 Q12
Rate 0 - 100 10 Q5
HP Filter Sync
Parameter Value Range Default Value Q-Link No.
Wet/Dry 0 (DRY) - 100 (WET) 100 Q9
Low Freq 0 - 100 0 Q10
High Freq 0 - 100 100 Q11
Resonance 0 - 100 50 Q12
Rate 8 bars - 1/32 1/4 Q5
Auto Wah
This effect is a low-pass filter modulated by an envelope. The envelope is triggered by the
incoming audio signal's amplitude. The amount of the envelope on the cutoff frequency is user-
definable. This yields a classic funky "wah wah"- like sound.
Parameter Value Range Default Value Q-Link No.
Wet/Dry 0 - 100 100 Q9
Resonance 0 - 100 75 Q10
Attack 0 - 100 30 Q11
Release 0 - 100 30 Q12
Center 0 - 100 50 Q5
Sensitivity 0 - 100 50 Q6
HP Filter
This effect is a static filter without modulation.
Parameter Value Range Default Value Q-Link No.
Frequency 10 - 19999 1500 Q10
Resonance 0 - 100 0 Q11
LP Filter
Parameter Value Range Default Value Q-Link No.
Frequency 10 - 19999 1500 Q10
Resonance 0 - 100 0 Q11

Akai MPC Specifications

General

Impedance	16 Ω
Driver unit	50 mm
Magnet type	Neodymium
Ear coupling	Circumaural
Headphone frequency	12 - 24000 Hz
Headphone sensitivity	114 dB
Cable length	2.1 m
Product color	Black, Red, Silver
Wearing style	Head-band
3.5 mm connector	Yes
Connectivity technology	Wired