34 35
Adding and Erasing Channels (Manual Method)
1
Use the number buttons to directly select the channel that
will be added or erased.
Ex) Channel “4”
2
Press the Add/Erase button:
Repeatedly pressing this button will alternate between
“Added” and “Erased.”
Note
• You can view any channel (including an erased channel) by using the number buttons on the remote
control.
To View Memorized Channel (PIP Mode)
1
Press the Menu button. Move the joystick up or
down to select “Channel”, then press the joystick
to enter.
2
Move the joystick up or down to select “Ch. Scan”,
then press the joystick to enter.
Only the memorized channels are chosen.
Move the joystick right to stop.
To Next Page
Loading...
General