Using Dolby Virtual
This feature allows the PDP’s optional L/R speakers to provide a Home Theater-like Dolby
effect. The center and surround sounds are mixed into the L/R speakers.
Using a Subwoofer
56 57
1
Press the Menu button. Move the joystick up or
down to select “Sound”, then press the joystick
to enter.
2
Move the joystick up or down to select “Woofer”,
then press the joystick to enter.
3
Move the joystick left or right to select “On”.
4
Move the joystick up or down to select “Volume”,
then move the joystick left or right to adjust the
value of the item.
This sets the volume for the subwoofer.
5
Move the joystick up or down to select “Cutoff
Freq.”, then move the joystick left or right to adjust
the value of the item.
This sets the cutoff frequency for the subwoofer.
For example, if you set the cutoff frequency at
130Hz, the subwoofer will reproduce frequencies
of 130Hz and lower.
6
Press the Menu button to exit.
1
Press the Menu button. Move the joystick up or
down to select “Sound”, then press the joystick
to enter.
2
Move the joystick up or down to select “
Dolby
Virtual
”.
3
Move the joystick left or right to select “On”.
4
Press the Menu button to exit.
To Next Page
Loading...
General