69
Adjusting the PC Screen
68
Adjusting the R.G.B
Preset:
• Press the Source button, then move the joystick up or down to select PC. Press the joystick to select PC mode.
1
Press the Menu button, then press the joystick to
enter.
2
Move the joystick up or down to select “Color
Tone”, then move the joystick left or right to select
“Custom”. When “Custom” is selected, the word
“Color Adjust” will appear on the screen.
3
Move the joystick up or down to select “Color
Adjust”, then press the joystick to enter.
4
Move the joystick up or down to select the item you
want to change, then move the joystick right or left
to change the value of the item, using the on-screen
gauge as your guide.
5
Press the Menu button to exit.
Changing the Position of the Image
After connecting the PDP to your PC, adjust the position of the screen if it is not well-aligned.
Preset:
• Press the Source button, then move the joystick up or down to select PC. Press the joystick to select PC mode.
1
Press the Menu button. Move the joystick up or
down to select “PC”, then press the joystick to enter.
2
Press the joystick to enter, then adjust the screen
position by using the joystick button.
3
Press the Menu button to exit.
To Next Page
Loading...
General