8786
Using the V-Chip
The V-Chip feature automatically locks out programs that are deemed inappropriate
for children. The user must enter a PIN (personal ID number) before any of the V-Chip
restrictions are set up or changed.
Note : When the V-chip feature is activated, the PIP and auto channel program features
do not function.
Setting Up Your Personal ID Number (PIN)
1
Press the Menu button. Move the joystick up or
down to select “Function”, then press the joystick
to enter.
2
Move the joystick up or down to select “V-Chip”,
then press the joystick to enter.
3
The message "Enter Pin" will appear. Enter your
4-digit PIN number.
Note: The default PIN number of a new TV set is
“0-0-0-0.”
4
The “V-chip” screen will appear. Move the joystick
up or down to select “Change Pin,” then press the
joystick to enter.
5
The Change pin screen will appear. Choose any
4-digits for your PIN and enter them.
As soon as the 4 digits are entered, the “Confirm
New Pin” screen appears. Re-enter the same 4
digits. When the Confirm screen disappears, your
PIN has been memorized.
6
Press the Menu button to exit.
Note
• If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin
to 0-0-0-0 : Power Off ➔ Mute ➔ 8 ➔ 2 ➔ 4 ➔ Power On.
How to Enable/Disable the V-Chip
1
Press the Menu button. Move the joystick up or
down to select “Function”, then press the joystick
to enter.
2
Move the joystick up or down to select “V-Chip”,
then press the joystick to enter.
3
The message "Enter Pin" will appear. Enter your
4-digit PIN number.
4
The “V-chip” screen will appear.
To enable the V-Chip feature, move the joystick to
the right so that the “V-Chip Lock” field is Yes.
(Move the joystick to the left or right will alternate
between Yes and No.)
5
Press the Menu button to exit.
To Next Page
Loading...
General