To Next PageTo Next PageWhy is there no sound from my AKG APS4?
If there is no sound, check the following: * Ensure the power supplies are connected to the power outlets. * Verify the DC cables are correctly connected and not defective; replace them if needed. * Make sure the antennas are connected.
What to do if I have poor reception on some channels with AKG APS4?
If you experience no or poor reception on some channels, consider the following: * Ensure both the transmitter and receiver are switched ON. * Replace the transmitter batteries. * Check the power supply connector for a secure fit. * Replace the power supply. * Ensure that the transmitter and receiver are tuned to the same frequency.
How to fix a dark green LED on AKG cables and connectors active antenna component?
If the green LED on an active antenna component is dark: * Connect the antenna cable or check the connectors for a secure fit. * Replace the antenna cable if it is defective.
What to do if one of the ERROR LEDs is lit on the AKG APS4 Cables and connectors antenna splitter?
If one of the ERROR LEDs on the antenna splitter is lit, check all cables and active antenna components connected to the antenna splitter. It is possible that the supply voltage for active antenna components is shorted out.
General| Brand | AKG |
|---|---|
| Model | APS4 |
| Category | Cables and connectors |
| Language | English |
