Operating modes
General informa-
tion
The charger is suitable for all 6/12/24 V lead-acid batteries (wet, MF, AGM and GEL).
Available operat-
ing modes
The following operating modes are available:
-Charging
- Back-up mode during vehicle diagnosis or software updates
-Refresh
- Power Supply mode
- Device options
Selecting the op-
erating mode
Connect mains cable to charger and plug into mains
The charger is on standby - 'Charging'
mode is displayed.
Charging mode
Charging mode is used for:
- Charging or conservation charging
with the battery either fitted or removed
- Charging while vehicle consumers are
switched on
Charging mode is automatically started af-
ter the charger is connected to the mains.
Back-up mode
Back-up mode relieves the vehicle battery
while a vehicle diagnosis or software up-
date is being performed.
1
Select other operating modes using the up/down keys