Device options
General informa-
tion
The device options allow the following to be configured:
- Language
User guide language: German/English
- Contrast of graphic display
- Configuration
an individual standard may be set
- Factory settings
to restore all device options to the factory settings
-Info
provides information on the
hardware and software version
total Ah charged
total operating time
Selecting device
options
Configuration
The following parameters can be configured to create an individual standard:
Charger lead length:
- 1 m - 10 m, adjustable in 0.5 m stages
- The following lengths may be requested in the scope of supply: 2.5 m, 5 m and 10 m
Initial values:
- Start mode (Charging/Back-up mode)
- Battery capacity (3 – 350 Ah)
- Battery type (WET, GEL and AGM)
- Voltage selection
automatic
Use the up/down keys to select the device options
1
CAUTION! Risk of damage when selecting and using individual charger lead
lengths. The user accepts full responsibility for shortening the charger leads sup-
plied and making the appropriate settings to reflect the individual charger lead
lengths. The manufacturer shall not be held liable for any damage arising from
such actions.
To Next Page
Loading...
