Akuvox C313 Series - Create Message; Maintenance

15
2.6.2. Create message
①
Press this icon to create a new message.
②
This option is to set the destination. If you want to call community 1,
building 1, unit 1, floor1, room 1, you need to enter 1.1.1.1.1.
③
This option is to type in your message context.
④Press the icon to send the message to the predefined destination.
⑤Press the icon to cancel and back to sent list.
2.6.3. Maintenance
① Press this icon to enter the maintenance list. The maintenance
message will be sent to the property management center so that you
can asked for help.
② Select which problem you are facing. And press confirm when you
see the prompt. For example, if the light does not work, click Light
column, then confirm to ask for help.