①
Press the icon to enter the Arming interface.
②
C313X supports 4 mode, they are indoor mode, sleeping mode,
outdoor mode and disarm mode.
③
Press this icon to enter the arming mode settings interface.
④You can see all of the 8 zones and corresponding sensor types
(slide down to check more information) in this interface.
⑤Press this icon to set the defence delay time. It means when
you change to the arming mode from other modes, there will be
30 seconds delay time.
⑥Press this icon to set the alarm delay. It means when the
sensor triggered, there will be 90 seconds delay time to
announce the notification.
⑦Tick/untick to enable/disable the corresponding zone
To Next Page
Loading...
Need help?
General
