Akuvox C313 Series User Manual

18
under the selected mode.
⑧Press save icon to save the modification.
2.7.2. Disarm Code
①Press this icon to enter the disarm code settings interface.
You can modify the disarm code here.
②
Enter the old disarm code first, it is 0000 as default.
③Enter the new disarm code
④
Enter the new disarm code again for confirming.
⑤
Press save icon to save the modification.
、、

Akuvox C313 Series Specifications

General

Audio	Built-in Microphone and Speaker
Installation	Wall-mounted
Ethernet	10/100Mbps
Relay Output	1
PoE	IEEE 802.3af
Power Supply	DC 12V or PoE