Volume and tone configuration include various volume controls. Moreover, you can upload tones to
enrich the user experience.
VolumesVolumes
To set up volumes, go to the web Device > AudioDevice > Audio interface.
Tamper Alarm VolumeTamper Alarm Volume: Set the volume when the tamper alarm is triggered.
Voice Prompt VolumeVoice Prompt Volume: Set the voice prompt volume.
Open Door TonesOpen Door Tones
You can enable or disable the door-opening tones on the web Device > Audio > Open DoorDevice > Audio > Open Door
Tone SettingTone Setting interface.
Open Door Inside Tone Enabled:Open Door Inside Tone Enabled: The tone sounds when users open the door by
pressing the Exit Button.
Open Door Outside Tone Enabled:Open Door Outside Tone Enabled: The tone sounds when users open doors via
various device-supported access methods.
Volume and Tone ConfigurationVolume and Tone Configuration
To Next Page
Loading...
