Hold Delay(Sec)Hold Delay(Sec): Determine how long the relay stays activated. For example, if set to 5
seconds, the relay remains to be opened for 5 seconds before closing.
DTMF ModeDTMF Mode: Set the digits of the DTMF code.
1 Digit DTMF1 Digit DTMF: Define the 1-digit DTMF code within the range(0-9 and *,#) when the
DTMF Mode is set to 1-digit.
2~4 Digits DTMF2~4 Digits DTMF: Set the DTMF code based on the number of digits selected in
the DTMF Mode.
Relay StatusRelay Status: Indicate the states of the relay, which are normally opened and closed. By
default, it shows low for normally closed(NC) and high for Normally Open(NO).
Relay NameRelay Name: Assign a distinct name for identification purposes.
Security Relay SettingSecurity Relay Setting
The Security Relay, known as Akuvox SR01, is a product designed to bolster access security by
preventing unauthorized forced entry attempts. Installed inside the door, it directly governs the door
opening mechanism, ensuring that the door remains secure even in the event of damage to the
device.
To set up the security relay, navigate to Access Control > Relay > Security RelayAccess Control > Relay > Security Relay interface.
To Next Page
Loading...
