Connect TypeConnect Type: Indicate the connection type between the security relay and the door
phone.
Trigger Delay(Sec)Trigger Delay(Sec): Set the delay time before the relay triggers. For example, if set
to 5 seconds, the relay activates 5 seconds after pressing the Unlock button.
Hold Delay(Sec)Hold Delay(Sec): Determine how long the relay stays activated. For example, if set to 5
seconds, the relay remains to be opened for 5 seconds before closing.
1 Digit DTMF1 Digit DTMF: Define the 1-digit DTMF code within the range(0-9 and *,#) when the
DTMF Mode in the Relay section above is set to 1-Digit.
2~4 Digits DTMF2~4 Digits DTMF: Set the DTMF code based on the number of digits selected in
the DTMF Mode.
Relay NameRelay Name: Name the security relay. The name can be displayed in door opening logs.
When connecting to the SmartPlus Cloud, the Cloud server will automatically assign the
relay name.
TestTest: Click to send the signal to the SR01. When the door phone and SR01 are pairing,
click Test to finish the matching.
Web Relay SettingWeb Relay Setting
A web relay has a built-in web server and can be controlled via the Internet or a local network. The
device can use a web relay to either control a local relay, or a remote relay somewhere else on the
network.
To Next Page
Loading...
