Assigned The Authority ForAssigned The Authority For: Specify the contacts authorized to open doors via DTMF:
Disabled: No numbers can unlock doors using DTMF.
Allowlist And Push Button: Doors can be opened by numbers added to the door
phone's contact list and pressing the push button.
All Numbers: Any numbers can unlock using DTMF.
Unlock by HTTP CommandUnlock by HTTP Command
The device supports remote door unlocking via an HTTP command. Simply enable this feature and
input the HTTP command (URL) for the device. This will trigger the relay and open the door, even if
the users are away from the device.
Set it up on the web Access Control > Relay > Open Relay Via HTTPAccess Control > Relay > Open Relay Via HTTP interface.
Session CheckSession Check: Enable to enhance data transmission security.
User NameUser Name: Set a username for authentication in HTTP command URLs.
PasswordPassword: Set a password for authentication in HTTP command URLs.
To Next Page
Loading...
