MJPEG and RTSP are the primary monitoring stream types discussed in this chapter.
MJPEG, or Motion JPEG, is a video compression format that uses JPEG images for each video
frame. Akuvox devices display live streams on the web interface and capture monitoring
screenshots in MJPEG format. Settings related to MJPEG determine video quality and the on/off
status of the live stream function.
RTSP stands for Real Time Streaming Protocol. It can be used to stream video and audio from the
third-party cameras to the device. You can add a camera’s stream by adding its URL. The URL
format of Akuvox devices is rtsp://Device’s IP/live/ch00_0
ONVIF is an Open Network Video Interface Forum. It enables the device to scan and discover
cameras or intercom devices with activated ONVIF functions. Live streams obtained through ONVIF
are essentially in RTSP format.
MJPEG Image CapturingMJPEG Image Capturing
You can take a monitoring image in Mjpeg format with the device. To do this, you need to turn on the
Mjpeg function and choose the image quality.
To set it up, navigate to Surveillance > RTSP > BasicSurveillance > RTSP > Basic interface.
MJPEG Authorization EnabledMJPEG Authorization Enabled: Once enabled, accessing the door phone’s real-time
image or video by entering the URL into the browser requires verification of the
Authentication Mode, RTSP Username, and RTSP Password.
Monitor and ImageMonitor and Image
To Next Page
Loading...
