RTSP Authorization EnabledRTSP Authorization Enabled: Once enabled, configure RTSP Authentication Mode,
RTSP Username, and RTSP Password. These credentials are required for accessing the
door phone's RTSP stream from other intercom devices like indoor monitors.
Authentication ModeAuthentication Mode: Select between Basic and Digest. Basic is the default
authentication type.
Basic: The username and password are joined in the form “username: password”,
followed by the Base64 encoding before being sent to the server. The server then
decrypts the string to retrieve the username and password for verification.
Digest: Use hashing instead of the easily reversible Base64 encoding. A token is
used for verification.
User NameUser Name: Set the username for authorization.
PasswordPassword: Set the password for authorization.
RTSP Stream SettingRTSP Stream Setting
The RTSP stream can use either H.264 or Mjpeg as the video codec. If you choose H.264, you can
also adjust the video resolution, bitrate, and other settings.
Go to Surveillance > RTSP > RTSP StreamSurveillance > RTSP > RTSP Stream interface.
To Next Page
Loading...
