ALWAYS Read these installation instructions carefully before installing
or servicing this product.
LEAVE THIS GUIDE WITH THE END USER FOR FUTURE
REFERENCE & SERVICING ADVICE.
ALWAYS Ensure the ribbon cable is correctly installed and no cables
have become trapped. Ensure the front cover is correctly
installed.
NEVER Open the front cover whilst in use.
Do not block the fl ow of water from the shower head, by
placing it (smothering it) on your hand or any other part of
your body or foreign object. Do not crush or kink the
shower hose, this could damage the hose, cause leaks and
activate the Pressure Relief Device (PRD).
ALWAYS Isolate or turn off the power supply and water supply before
any maintenance or cleaning is required.
This product must only be installed and serviced by a competent and qualifi ed person e.g. NICEIC qualifi ed
person in accordance with both the current edition of the Wiring Regulations BS7671 and the current
Building Regulations and following these instructions. Any actions to remove, modify or fi x this shower by
non AKW appointed engineers or service staff will invalidate this warranty.
All products manufactured and supplied by AKW are safe provided they are installed, used correctly and
maintained in accordance with these instructions.
To Next Page
Loading...
