Need help?Do you have a question about the AL-KO ROBOLINHO 3000 and is the answer not in the manual?
General| Type | Robotic lawn mower |
|---|---|
| Cutting width | 300 mm |
| Cutting system | Rotary blades |
| Number of wheels | 4 wheel(s) |
| Recommended lawn area | 1200 m² |
| Maximum cutting height | 60 mm |
| Minimum cutting height | 30 mm |
| Grass collecting volume | - L |
| Cutting clearance adjustment | 7 |
| Power source | Battery |
| Battery voltage | 25.2 V |
| Battery capacity | 2.9 Ah |
| Cordless | Yes |
Weight and Dimensions| Weight | 8000 g |
|---|
Explains the functions of the control panel and its keys.
Describes the different sensors and their functions.
Details on safety devices and protective equipment requirements.
Guidelines for properly laying the boundary cable around the mowing area.
Detailed steps for switching on the Robolinho and initial setup.
Process for calibrating the lawnmower.
An overview of the main menu structure and submenus.
Steps required to access and start the programming menus.
Details on accessing and using the program menu functions.
How to set up the weekly mowing schedule.
Accessing the settings menu for various adjustments.
Information on common fault messages and their meanings.
Safety precautions specific to mowing operations.
How to adjust the lawnmower's cutting height.
Step-by-step guide to start the mowing operation.
Routine cleaning procedures for the lawnmower.
Step-by-step guide to replace the cutting blades.
Information and procedures for charging the battery.
Information on how and where to get repairs done.
Troubleshooting low battery voltage issues.
Troubleshooting errors related to the tilt sensor.
Troubleshooting lift sensor errors.
Diagnosing and fixing no loop signal errors.
Addressing weak loop signal issues.
Diagnosing calibration errors related to loop detection.
Troubleshooting calibration errors involving collisions.
Diagnosing and resolving battery-related errors.
To Next Page