II Aladin
®
Pro – Survey
22
Diveplan-mode:
Activation: manually by contacts
The diveplan-mode assists the planning of a future dive. It allows planning of no-
stop and decompression dives with freely determinable depth and dive time. On
repeat dives, the surface interval can also be chosen at will. Calculations are based
on the temperature data of the last dive and assume a normal workload.
SOS-mode:
Activation: automatically
If the diver remains above a depth of 1.2 metres for more than three minutes
without observing the prescribed decompression, the computer switches into SOS-
mode after the dive and displays <SOS> instead of the depth. The computer is
locked for use for the next 24 hours. Desaturation is still calculated including
microbubbles in the tissues. Diving is again possible after 24 hours, but the SOS-
mode can influence the calculations of Aladin
®
Pro for another three days after
the incident (microbubbles).
An eventual accident can be analysed by means of the PC-interface and DataTrak-
software.
2 Operation
m
depth dive time
max. depth deco info
DECOSTOP
DIVEPLAN
m
depth dive time
max. depth deco info
DECOSTOP
To Next Page
Loading...
