5 | ADC-V622 180° Camera with Digital Pan / Tilt / Zoom Quick Installation Guide | 6
4 Activate the WPS Mode on the router. The ADC-V622 will
begin to connect to the Wi-Fi network. The LED will be solid
green when the connection is complete.
5 Add the device to the account by either selecting the account
in MobileTech OR by using a web browser and entering the
6 Select the camera from the video device list or type in its
MAC address to begin adding the camera. The camera’s
MAC address is located on the back of the camera near
the power cable.
7
Customer Website.
You can now power down the camera and install it in its
final location using the included hardware.
Green | Solid
Red | Solid
Internet connection
No network connection
Local network connection
System booting
Green | Flashing
Red | Flashing
STATUS
Local network and internet connection
No local network or internet connection
Local network connection only, no internet
Camera is booting
LED Reference Guide
To Next Page
Loading...
Need help?
General
