21
FLUSH-MOUNTED BOX SEPARATOR
243 mm
ARRIBA
UP
HAUT
ARRIBA
UP
HAUT
114 mm 114 mm
15 mm
2 flush-mounted boxes in parallel
372 mm
ARRIBA
UP
HAUT
ARRIBA
UP
HAUT
114 mm 114 mm
15 mm
ARRIBA
UP
HAUT
114 mm
15 mm
Enlarge for each
set of separators
15 mm
Width
1 flush-mounted box
114 mm
ARRIBA
UP
HAUT
3 flush-mounted boxes in parallel
Code 9740004
SET OF SEPARATORS FOR FLUSH-MOUNTED BOXES
CEM-001
Elements which permit the assembly of a single unit
made up from several flush-mounted boxes. For use when
several entrance panels are installed in parallel, to assure
the necessary separation between the boxes so that all the
entrance panels will be correctly aligned. One set of sepa-
rators is required for each pair of flush-mounted boxes.
Note: Please consider that the necessary cavity in the
wall should be enlarged by 15mm for each set of separa-
tors used.
To Next Page
Loading...
