Alcatel-Lucent 7450 ESS-12 - Page 383

Page 354 7450 ESS OS Basic System Configuration Guide
script
Syntax [no] script script-name [owner owner-name]
Context config>cron>action
Description This command creates action parameters for a script including the maximum amount of time to keep the
results from a script run, the maximum amount of time a script may run, the maximum number of script runs
to store and the location to store the results.
The no form of this command removes the script parameters from the configuration.
Default none — No server-address is configured.
Parameters script script-name — The script command in the action context connects and event to the script which will
run when the event is triggered.
owner owner-name — Owner name of the schedule.
Default TiMOS CLI
The no form of this command removes the script entry from the action context.
schedule
Syntax [no] schedule schedule-name [owner owner-name]
Context config>cron
Description This command configures the type of schedule to run, including one-time only (oneshot), periodic or
calendar-based runs. All runs are determined by month, day of month or weekday, hour, minute and interval
(seconds).
The no form of the command removes the context from the configuration.
Default none
Parameters schedule-name — Name of the schedule.
owner owner-name — Owner name of the schedule.