Field Replaceable Units
7450 ESS-7 Page 151
To remove the air filter:
Step 1 Use a flathead screwdriver to loosen the captive screws on the filter tray faceplate.
Step 2 Pull the faceplate straight out of the slot with the filter tray attached by the Velcro tabs.
NOTE: Velcro tabs connect the filter tray to the filter tray faceplate. When you remove
the filter faceplate, make sure the filter tray is attached. They should be removed as one
unit.
Step 3 Detach the filter tray.
Table 45: Air Filter Features
Key Description
1 Filter tray
2 Filter tray faceplate
3 Captive screws (2 per air filter tray)
To Next Page
Loading...
