Installing AC Power Components
Page 76 7450 ESS-7
Follow these steps to remove the front safety cover:
Step 1 Loosen the safety cover captive screws.
Step 2 Remove the cover.
Follow these steps to install an AC PSM:
Step 1 Remove the PSM from the packaging.
Step 2 Insert the PSM in either power bay 1 or 2. Slide the unit into the slot.
Step 3 Firmly press the power converter all the way into the slot.
Step 4 Tighten captive screws.
Step 5 (Optional) Install a redundant AC PSM into the other slot.
Step 6 Replace the front safety cover and tighten captive screws.
To Next Page
Loading...
